重大基坑坍塌事故虚拟仿真系统研究

为预防基坑坍塌事故发生、进行重大事故警示教育，以杭州地铁湘湖站北2基坑坍塌事故为素材，研究构建重大基坑坍塌事故虚拟仿真培训系统。对案例事故涉及的设计、施工、环境三大因素的技术问题进行总结，研究了事故链各致险因素及对推动事故发生所起作用，完成仿真系统平台设计和开发工作。系统应用多种制作技术创建工程场景模型，展示深基坑工程复杂的施工工序和空间关系，再现基坑坍塌事故发生发展过程和贴近实际的灾难场景。研究结果表明:仿真系统成果可丰富地下工程教学、施工现场安全教育和安全监察培训的内容和形式。     

基于变权灰色云模型的江苏省水环境系统脆弱性评价

水环境系统脆弱性是水资源利用与生态环境研究的热点问题，通过研究水环境系统的内在机理，综合考虑影响水环境系统脆弱性的资源、环境、经济、社会等因素，借助驱动力-压力-状态-影响-响应-管理（DPSIRM）框架构建水环境系统脆弱性评价指标体系。在此基础上，构建基于变权灰色云模型的评价方法，对2004~2014年江苏省水环境系统脆弱性进行评价。结果表明：2004~2014年水环境系统脆弱性指数由47.056提高到63.210，脆弱性等级由“重度脆弱”演化为“中度脆弱”，并长期维持在“中度脆弱的”等级，2014年出现了向“轻度脆弱”状态转变的趋势。分析各个子系统对水环境系统脆弱性影响程度可知，影响子系统和响应子系统对江苏省水环境脆弱性系统的影响程度逐年增加；而压力子系统和管理子系统对水环境系统脆弱性的影响程度逐年下降；其它子系统对水环境系统脆弱性的影响维持在一定水平小幅度波动。     

高温高压下煤孔隙结构的变化对瓦斯吸附特性的影响

为了研究高温高压条件下煤孔隙结构变化对瓦斯吸附特性的影响，选取九里山矿无烟煤，在压力为7 MPa、温度为40～130℃的条件下进行等温吸附实验和压汞实验。研究结果表明:煤样对甲烷的等温吸附曲线在该压力、温度条件下符合Ⅰ型吸附曲线特性，吸附规律符合Langmuir吸附模型；在压力7 MPa和温度130℃条件下，煤样的孔隙结构发生一定的变化，煤的比表面积增大、累计孔体积降低，可见孔及裂隙的数量比例增高，加强了煤样孔隙之间的连通度，导致原本吸附在煤样表面的甲烷分子大量解吸；在压力不变的情况下，随着温度的不断增高，煤的极限吸附量逐渐减小，其主要原因是样品孔隙结构的破坏和分子间作用力的变化。     

Bioconcentration and half-life of quinalphos pesticide in rice-fish integration system in the Mekong Delta,Vietnam

In order to determine the distribution and enable the elimination of quinalphos, a popular active pesticide compound used in the Mekong Delta, an experiment was set up in a rice-fish integration system in Can Tho City, Vietnam. Fish was stocked into the field when the rice was two-months old. Quinalphos was applied twice in doses of 42.5 g per 1000 m². Water, fish and sediment samples were collected at time intervals and analyzed by a Gas Chromatography Electron Capture Detector system. The results show that quinalphos residues in fish muscles were much higher than those of the water and the bioconcentration factor (logBCF) was above 2 for the fish. The half-life of first and second quinalphos applications were 12.2 and 11.1 days for sediment, 2.5 and 1.1 days for silver barb, 1.9 and 1.3 days for common carp, and 1.1 and 1.0 days for water, respectively.     

基于Landsat 8遥感数据的天津市地表温度反演

以Landsat 8遥感数据为数据源,进行天津市地表温度反演研究。首先采用单通道算法反演地表温度,并利用均值标准差法进行温度分级。然后建立不同温度等级面积比例的估算模型。再通过随机样点,从不同温度等级和土地覆盖类型2个角度,分别建立并比较不同类样点的地表温度与各指数的拟合模型。结果表明:次高温区域面积比例与人口密度、人均GDP都具有较高的决定系数;地表温度与NDVI、BAEM的二元线性回归决定系数高于地表温度与单一指数的决定系数;将样点分类后,低温点与MNDBI的决定系数高于其他温度等级样点,水域和植被样点与各种指数的决定系数高于其他地物类型样点。     

江苏省太湖流域水生态健康评估的初步实践及展望

阐述了水生态健康的内涵与意义,从江苏省率先在太湖流域开展水生态环境功能分区管理的顶层设计,构建以水生态健康指标为核心的水生态健康评估技术体系,地方对照水生态环境功能区划的水生态分级管控目标开展的应用与实践结果等3个方面,回顾了江苏省太湖流域水生态健康评估工作的主要进展,提出了完善水生态健康评估技术体系和推进流域水生态健康评估工作的建议。     

Spatial and Seasonal Response of Municipal Water Use to Weather across the Contiguous U.S.

Weather variability has the potential to influence municipal water use, particularly in dry regions such as the western United States (U.S.). Outdoor water use can account for more than half of annual household water use and may be particularly responsive to weather, but little is known about how the expected magnitude of these responses varies across the U.S. This nationwide study identified the response of municipal water use to monthly weather (i.e., temperature, precipitation, evapotranspiration [ET]) using monthly water deliveries for 229 cities in the contiguous U.S. Using city‐specific multiple regression and region‐specific models with city fixed effects, we investigated what portion of the variability in municipal water use was explained by weather across cities, and also estimated responses to weather across seasons and climate regions. Our findings indicated municipal water use was generally well‐explained by weather, with median adjusted R² ranging from 63% to 95% across climate regions. Weather was more predictive of water use in dry climates compared to wet, and temperature had more explanatory power than precipitation or ET. In response to a 1°C increase in monthly maximum temperature, municipal water use was shown to increase by 3.2% and 3.9% in dry cities in winter and summer, respectively, with smaller changes in wet cities. Quantifying these responses allows urban water managers to plan for weather‐driven variability in water use.     

中国生态环境科技创新体系建设研究

分析国内外生态环境科技创新的发展现状，相比较国外以市场机制为导向、以企业为创新主体、政府通过政策和管辖支撑创新的体系特征，我国已形成四大类环境类科创载体，但尚未形成成熟有效的技术成果产业化机制以及市场与政策协同促进科技创新的发展模式。本文根据生态环境科技创新的强政策驱动性、技术验证放大周期长以及集成性强的特点，重点通过环境技术研发、技术成果转化、技术放大与赋能、产业拓展与推广四个方面阐述了生态环境科技创新体系建设的主要环节：环境技术的研发由以科研机构为主的传统自发性研发、企业迭代性研发和联合应用型研发组成；技术成果的转化经历挖掘发现、技术识别与判断、知识产权评估评价后进入已成立的企业或新设公司，在这一过程中，成果转化专业队伍起着至关重要的作用；技术放大与赋能旨在为有创新技术的企业提供科技创新政策、二次研发中试验证、首台套工程案例、投融资等资源的对接，以协助初创企业成长；产业的拓展与推广则通过为解决环境问题形成集成方案、孵化平台为企业背书和产业政策匹配等方式助力企业长期发展。最后从加强专业化创新平台、技术评估体系、成果转化人才培养体系建设以及疏通投融资渠道等方面对中国未来生态环境科技创新发展提出相关建议。     

试论生态文明制度体系的构建

建立健全生态文明制度体系是推进我国生态文明建设的重点。党的十八届三中全会通过的《中共中央关于全面深化改革若干重大问题的决定》指出,生态文明制度体系应当包括决策制度、评价制度、管理制度与考核制度等内容。立足社会主义制度建设的中国特色,针对我国生态文明建设的具体需求,本文将生态文明制度体系解构为四大板块:绿色高效决策制度、生态有价评估制度、生态环境监管制度与生态优先考核制度,并进一步明确了各项制度构建工作的具体内容。生态文明制度体系的构建和不断完善,将为全面建成人与自然和谐的美丽中国提供系统保障。     

Alternative method to prevent thermal runaway in case of error on operating conditions continuous reactor

Thermal runaway was studied in a continuous tubular pilot reactor under steady-state regime. Different accident scenarii were conducted by making some errors on reactant concentrations and/or temperature feed. To prevent thermal runaway, control by direct contact by solvent injection was used at different reactor locations. This injection allowed controlling the maximum reaction temperature. A simplified analytical method to estimate the maximum reaction temperature along the reactor was used.Benefit of this control method was the diminution of computational time. Furthermore, by injecting solvent to control maximum reaction temperature, there is no need to shut down the unit. The control method was validated experimentally.